L type shrink wrapping machine
Product name: L type shrink wrapping machine
Category: Box packing machine
Automatic shrink wrapping machine specification:
L type shrink wrapping machine description:
Type:
Automatic wrapping machine series
Product Model:
N28
Name:
L type shrink wrapping machine
Sealing type:
L-sealing / Corner cut and middle sealing
Working height:
780-850 mm
L-bar sealing size:
580 x 500 mm
Sealing height:
115 mm
Product size:
Width + height < 420mm, length + height < 490mm
Film:
Center-folded polyolefin (POF) film
Max film size:
530mm (width) x 280mm (outer diameter)
Packing capacity:
15 - 35 packs/min
Power supply:
3 phase, 380V, 50-60Hz
Power consumption:
Max. 8.5 kW
Air pressure:
0.6MPa (6 bar)
Oven size:
1200(L) x 450 (W) x 220(H) mm
Shrink tunnel conveyor speed:
Max. 40 m/min
Shrink tunnel conveyor:
Rotating silicon coated rods
Main control components:
Omron temperature controller, timer, relay and sensor
Machine main material:
Powder coated carbon steel
Machine weight:
650KG
Machine dimension:
1800 x 780 x 1550mm + 1600 x 600 x 1360mm
The heat shrink packaging machine series is based on the jet heat shrink machine, increases the capacity of the shrink chamber, and is equipped with a higher power transmission motor, thus having a higher load-bearing capacity. Multiple high-power internal circulation fans are used to provide a more uniform and sufficient internal circulation hot air in the shrink chamber, which can shrink wrap larger items. This machine uses an electronic speed-regulating motor with a wide speed adjustment range. The heat shrink chamber adopts a fully enclosed hot air internal circulation device, and the product shrink packaging effect is good. This equipment has a novel and beautiful appearance, easy operation and maintenance, and can be used for shrink packaging of any shrink film.
Features of heat shrink wrapping machine:
1. Large air volume fan, the product can be quickly cooled and finalized after heat shrinkage;
2. Dual high-power motors ensure sufficient circulating air volume;
3. Japan FUJI power supply main switch, excellent quality;
4. The entrance and exit of the furnace are equipped with heat-insulating baffles;
5. Equipped with thermal insulation curtains, which greatly reduces heat energy loss;
6. There are multiple options of ordinary and compact shaft types, so small items can be packed without shifting;
7. Equipped with bottom corner bolts, which can be used with production lines of different heights;
8. Stainless steel heater, fast heating and long service life.
9. Worm gear reducer and high-power motor ensure smooth transportation without jitter;
10. The bottom is equipped with casters to move the machine freely;
11. Specially designed air duct system, the product is heated evenly;
12. Mainly suitable for packaging of PE film, POF film, PVC film
Automatic shrink wrapping machine video:
L type shrink wrapping
machine is a fully automatic and unmanned packaging machine that can be
used with automated packaging lines. Feeding, bagging, sealing and
cutting, and shrinking are completed automatically. It has high work
efficiency and is widely used in mass production industries such as
printing, color boxes, greeting cards, photo albums, photo frames,
medicine, electronics, daily chemicals, and cosmetics. Below, the editor
of Sainty Packaging summarizes the operating precautions for the
L-shaped sealing and cutting packaging machine.
1.
Operators of L type shrink wrapping machine must read the operating
instructions of the machine in detail before operating the machine.
2.
In order to prevent accidents, when operating this machine, the
workplace should be kept well ventilated, and the leakage of liquid and
gas due to damage to the packaging should be avoided.
3.
When repairing and maintaining the L-shaped sealing and cutting
packaging machine, maintenance personnel must read the maintenance
instructions of the machine in detail before performing repair and
maintenance work.
4.
When repairing and maintaining the machine, be sure to cut off the
power supply before proceeding with repair and maintenance work.
5.
If any accident occurs after the L-shaped sealing and cutting packaging
machine is in operation, the power must be turned off first, and then
corresponding measures must be taken.
6.
All air pressure pipelines and cylinders of the L-type sealing, cutting
and packaging machine must not have oil or water or other pollutants.
If these pollutants are present, the warranty will be invalid.
CopyRight 2022 All Right Reserved
